PEER M12649 Tapered Roller Bearings

Dimension SVV:7.02 in; Grease Lubrication - B/C/O Seal:350 rpm; Shaft Size  :4-15/16 in; Eng Internal Radial Clearance - Max:0.0079; UPC Code:0883450369671; Dimension F:19.70 in; Pre Install Clearance Min:0.0063 in; Grease Lubrication - T Seal:900 rpm; Housing Style:Four-Bolt Pillow Blo; D

Rolling Element Material:Steel; High-Speed Steel:Standard; Large-capacity type:E (Large-capacity ty; Format symbol:NU (double brims for; Symbol of Bearing Ring Shape:No symbol: Internal; Raceway Ring Shape:Cylindrical Roller; Inner/Outer Ring Material:Steel; Specifications:Standard; Cylinder shape (

B:30 mm; ras max:0.3 mm; da min:40 mm; Precision class:P0; d:38 mm; rs min:0.3 mm; Brand:NTN; Lubrication hole on inner ring:Non/No; Mass:0.07 kg; F:43 mm;

Housing Material:1045 Carbon Steel; Volume Discount:Available; Seals:DD (Contact Rubber S; Type:Bearings with Housin; Bearing I.D. d(mm):35; Bearing Used:Deep Groove Ball Bea; Holder Surface Treatment:Electroless Nickel P; Bearing Retained:Yes (with retaining; Type:Bearings with Housin; Bearing Reta

A1:20 mm; Designation of bearing:ES211G2T04; C0:29.2 kN; Weight:3.01 kg; J:184 mm; Z:77.8 mm; B1:48.4 mm; A:43 mm; C:43.55 kN; S:12 mm;

Width B (or T)(mm):14; Type:Ball; Size Standards:Metric Series; Seal Part Structure:Single Shielded; Volume Discount:Available; Seal Part Structure:Single Shielded; RoHS:6; Bearing Style:Single Shielded; Bearing Style:Single Shielded; Days to Ship:6 Days or more;

Seal:Silicone; Accessory:No Cover; Unit, Type:Bearing Unit with Fr; Machining:No; Machining:No; Unit Body Material:Shaped steel/Groove-; Stroke:900; Rolling Element Material:Bearing Steel; Days to Ship:9 Days or more; Basic Load Rating, Static Rating(N):68200;

Bearing Retained:Yes (with retaining; Bearing Retained:Yes (with retaining; Bearing Part Number:6001; Days to Ship:8 Days; Number of Bearings:Single; Holder Surface Treatment:Electroless Nickel P; RoHS:6; Shape:Bottom Mount; Number of Bearings:Single; Type:Bearings with Housin;

T max.:100 °C; s1:38.9 mm; Recommended tightening torque for set screw:33 Nm; N:23mm; e:34 mm; J:225 mm; S:33.3 mm; C:66 kN; Designation of housing:FL215-; H:275 mm;

Basic Load Rating, Static Rating(N):17800; Shaft Bore Dia. d(φ):30; Unit Body Material:Cast Iron; Surface Treatment:No; Unit, Type:Insert Bearing Unit; Fit:J7; Surface Treatment:No; Rolling Element Material:Bearing Steel; Machining:No; Stroke:No;

Design Units:Imperial; da - Cone Frontface Backing Diameter:40.39 mm; Cage Type:Stamped Steel; B - Cone Width:16.520 mm; Y - ISO Factor9:1.35; T - Bearing Width:17.018 mm; Cup Part Number:19283; Series:19000; db - Cone Backface Backing Diameter:42.42 mm; R - Cone Backface To Clear Radius1:1.520 mm;

Bearing Used:Deep Groove Ball Bea; Bearing Retained:No; Holder Surface Treatment:Electroless Nickel P; Height H(mm):25 ～ 40; Bearing Used:Deep Groove Ball Bea; Type:Bearings with Housin; Lateral Width L(mm):32; Type:Bearings with Housin; Number of Bearings:Double; Bearing Retained:No;

Characteristic inner ring frequency, BPFI:8.44 Hz; Max operating temperature, Tmax:120 °C; Da max:279 mm; f0:15.8; Fatigue limit load, Cu:6.3 kN; Brand:NTN; ra max:2 mm; Radial clearance class:C3; Static load, C0:215 kN; B:46 mm;

End Cover2:EC532; H:344 mm; C1 Dynamic Load Rating:1170; J:470 mm; N1:42.00 mm; Housing:SNT 532; H1:170.0 mm; Max Grease Speed:1800; Housing Mass:54.5 Kg; Locating Rings (width x OD):SR290X17;

e:0.29; Brand:SNR; k:4.5 mm; Mass:11.84 kg; D:240 mm; Nlim:2,600 rpm; Radial clearance class:C4; Static load, C0:1,320 kN; Dynamic load, C:953 kN; Y2:3.45;